BHM35
magnetic drilling machine
Annular cutters Ø 12 – 35 mm Ø 7/16 – 1 3/8"
Twist drills Ø 1 – 13 mm Ø 1/16 – 1/2"
Countersinking Ø 10 – 35 mm Ø 3/8 – 1 3/8"
Length 275 mm 10 13/16"
Width 175 mm 6 7/8"
Height 293 – 383 mm 11 9/16 – 15 1/16"
Stroke 90 mm 3 9/16"
Weight 8.5 kg 18.7 lbs
Magnet (l x w x h) 160 x 81 x 36 mm 6 5/16 x 3 1/8 x 1 7/16"
Magnetic force 1,000 kg 2,205 lbs
Motor power 850 W 7.7 A
Total power 900 W 8.2 A
Speed (no load) 750 rpm
Speed (loaded) 400 rpm
Spindle weldon 19.05 mm 3/4"
Power source
110 - 120V AC 60 Hz
220 - 240V AC 50 - 60 Hz
To Next Page
Need help?
General