Check whether the hydraulic oil level is approx. 40 mm (1.6
in) below the filler opening Ä Fig. 75 (see also mark on
steering rod head), top up hydraulic oil if necessary.
For quality and quantity of oil refer to the "table of fuels and
lubricants".
Shift the travel lever forward against the stop Ä Fig. 76.
Lay a cloth down before loosening the venting screw.
Slacken the bleeding screw Ä Fig. 77.
Wait until all air has escaped, then tighten the bleeding
screw.
Fig. 75
Filling up hydraulic oil
Fig. 76
Fig. 77
Maintenance – Annual maintenance
BPR 50/55 D / BPR 60/65 D
75
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
