Bomag BVP 10/36 - User Manual

Questions and Answers

M
Michael KramerAug 12, 2025
How to troubleshoot Bomag BVP 10/36 Construction Equipment when the engine does not start?
- J
  Joshua DelgadoAug 13, 2025
  If the Bomag Construction Equipment engine doesn't start, several factors could be at play. First, ensure the fuel tank isn't empty and refuel if necessary. If the tank has fuel, the fuel system or nozzle might be clogged, requiring you to clean the fuel strainer in the carburetor or clean the fuel nozzle. Alternatively, there might be no ignition spark, in which case you should exchange the spark plug. Finally, the ignition switch could be defective, requiring you to exchange the ignition switch.
T
Tommy MartinezAug 20, 2025
What to do if Bomag Construction Equipment engine does not work at full speed?
- R
  ramireztammyAug 21, 2025
  If your Bomag Construction Equipment engine isn't reaching full speed, here's what to check: The throttle may be defective, in which case you should have the damage repaired. Also, the air filter might be clogged; clean or exchange the filter cartridge. In more serious cases, the engine or carburetor itself could be defective, potentially requiring you to exchange the engine or carburetor, or have the damage repaired.
D
David JacksonSep 1, 2025
Why Bomag BVP 10/36 Construction Equipment engine runs at high speed, but no vibration?
- V
  vargasjacobSep 1, 2025
  If the engine of your Bomag Construction Equipment runs at high speed but there is no vibration, the issue likely lies within these components: the centrifugal clutch may be defective, requiring you to exchange it. Alternatively, the V-belt might be cracked, in which case you should exchange the V-belt.