EasyManua.ls Logo

Bomag BVP 18/45 - User Manual

Bomag BVP 18/45
60 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating instructions
Maintenance instructions
Original operating instructions
Catalogue No.
008 062 61
12/2010
BVP 10/36 / BVP 18/45
S/N 861 834 03 .... > / S/N 861 834 04 .... >
Forward marching vibratory plate
www.discount-equipment.com
Go to Discount-Equipment.com to order your parts

Table of Contents

Questions and Answers

  • W
    warrenpatriciaAug 10, 2025
    How to troubleshoot Bomag BVP 18/45 when the engine does not start?
    • C
      Catherine GrayAug 10, 2025
      If the Bomag Construction Equipment engine doesn't start, several factors could be at play. First, ensure the fuel tank isn't empty and refuel if necessary. If the tank has fuel, the fuel system or nozzle might be clogged, requiring you to clean the fuel strainer in the carburetor or clean the fuel nozzle. Alternatively, there might be no ignition spark, in which case you should exchange the spark plug. Finally, the ignition switch could be defective, requiring you to exchange the ignition switch.
  • B
    Bianca CraigAug 19, 2025
    What to do if Bomag Construction Equipment engine does not work at full speed?
    • K
      Kaitlyn BoydAug 19, 2025
      If your Bomag Construction Equipment engine isn't reaching full speed, here's what to check: The throttle may be defective, in which case you should have the damage repaired. Also, the air filter might be clogged; clean or exchange the filter cartridge. In more serious cases, the engine or carburetor itself could be defective, potentially requiring you to exchange the engine or carburetor, or have the damage repaired.
  • K
    Kevin WoodsAug 29, 2025
    Why Bomag BVP 18/45 engine runs at high speed, but no vibration?
    • J
      Jordan SanchezAug 29, 2025
      If the engine of your Bomag Construction Equipment runs at high speed but there is no vibration, the issue likely lies within these components: the centrifugal clutch may be defective, requiring you to exchange it. Alternatively, the V-belt might be cracked, in which case you should exchange the V-belt.

Summary

Technical Data

Safety Regulations

General Safety and Usage Principles

Covers general safety, intended/unintended use, and operator qualifications.

Operational Safety Procedures and Risk Management

Details on loading, starting, handling dangers, risks, and conversions.

Machine Integrity and Safety Notes

Addresses handling damage, safety installations, and general safety notes.

Safety Decals and Markings

Identifies and explains the various safety stickers and decals on the machine.

Indicators and Controls

General Notes on Controls

Introduction to understanding machine controls and indicators.

Indicator and Control Element Descriptions

Detailed descriptions and illustrations of various machine controls and indicators.

Operation

Pre-Operation Checks and Setup

Covers general operation introduction, daily checks, and mounting the steering bow.

Engine Starting and Operation Procedures

Detailed steps for starting the engine, handling common issues, and performing basic work.

System Operation and Shutdown

Instructions for operating water sprinkling, switching off the motor, and loading/transport.

Maintenance

General Maintenance and Fuel;Lubricant Guidelines

Covers general maintenance rules, common faults, and specifications for fuels and lubricants.

Routine Maintenance Tasks

Details on running-in, daily, weekly, and monthly maintenance procedures.

Periodic and As-Required Maintenance

Covers semi-annual, annual, and as-required tasks like oil changes, valve adjustments, and engine conservation.

Trouble shooting

General Troubleshooting Guidance

Guidelines on how to approach and resolve machine faults.

Engine Troubleshooting and Remedies

A chart listing common engine faults, causes, and solutions.

Bomag BVP 18/45 Specifications

General IconGeneral
Engine Power1.6 kW
Plate Size1, 800 mm x 1, 200 mm
Operating weight1, 800 kg
Centrifugal force20 kN
Amplitude1.8 mm
Max Speed1.5 km/h
Travel Speed1.5 km/h

Related product manuals