Bomag BW 90 AD-5 - User Manual

Catalogue No.
008 067 01
Operating instructions
Maintenance instructions
Original operating instructions
05/2012
BW 80 AD-5/BW 90 AD-5/BW 100 ADM-5
BW 90 SC-5 / BW 100 SC-5
BW 100 ACM-5/BW 100 SCC-5
S/N 101 462 00 1139 > / S/N 101 462 01 1053 > / S/N 101 462 03 1065 >
S/N 101 462 05 1027 > / S/N 101 462 07 1013 >
S/N 101 462 04 1028 > / S/N 101 462 06 ....
Tandem Vibratory Roller
Combination Roller

Summary

Technical Data

Safety Regulations

Operation

Tests before taking into operation

Starting the engine

Provides step-by-step instructions for safely starting the machine's engine.

Driving the machine

Covers safe driving practices, including speed, inclines, and hazard avoidance.

Stopping the machine, operating the parking brake

Explains how to properly stop the machine and engage the parking brake.

Shutting down the engine

Provides instructions for safely shutting down the machine's engine.

Switching the vibration on and off

Details how to activate and deactivate the vibration function for effective compaction.

Switching the pressure sprinkling system on and off

Switching the tire sprinkling system on and off

What to do in events of emergency

Provides essential procedures for handling emergency situations and using the emergency stop.

Connecting;disconnecting the hydraulic breaker

Details the safe procedure for connecting and disconnecting hydraulic breakers.

Towing

Explains the safe procedures and precautions for towing the machine.

Loading;transport

Covers safe methods for loading and transporting the machine using ramps or cranes.

Maintenance

General notes on maintenance

Fuels and lubricants

Specifies the correct types of fuels, engine oil, hydraulic oil, and coolant for the machine.

Maintenance table

Presents a structured schedule of maintenance tasks based on operating hours.

Check the engine oil level

Check the fuel level

Checking the hydraulic oil level

Checking, cleaning the air filter, replacing if necessary

Instructs on inspecting, cleaning, and replacing the air filter element for engine protection.

Changing engine oil and oil filter

Provides detailed steps for changing the engine oil and oil filter.

Checking, tensioning, replacing the V-belt

Cleaning radiator and hydraulic oil cooler

Battery service

Change the fuel filter

Check the anti-freeze concentration and the condition of the coolant

Checking, adjusting the valve clearance

Changing hydraulic oil and breather filter

Details the procedure for changing hydraulic oil and the breather filter.

Change the hydraulic oil filter

Provides step-by-step instructions for changing the hydraulic oil filter element.

Changing the coolant

Changing the fuel lines

Trouble shooting

Engine problems

Lists common engine faults, their possible causes, and recommended remedies.

Disposal

Final shut-down of machine

Outlines the steps for final machine shutdown and disassembly, including environmental disposal.

Bomag BW 90 AD-5 Specifications

General

Drum Width	900 mm
Travel Speed	0 - 10 km/h
Engine Type	Diesel
Amplitude	0.5 mm
Drum Diameter	600 mm
Vibration Frequency	55 Hz
Engine Model	Kubota D1105