BOMANN WA 5721 - Page 13

13
• Close the drawer.
Foam
Foam Foam
Foam detection
detectiondetection
detection
Excessive foam forms when too much detergent is used. This affects the wash and
rinse cycle. The function automatically checks foaming; excessive foam is removed by
an extra rinse and spin cycle.
Fill in the laundry
Fill in the laundryFill in the laundry
Fill in the laundry
• Unravel the clothes before putting them into the machine.
• Each load should correspond to the nominal capacity of the appliance. Do not
overload the appliance. Different strengths, sizes and types of laundry can affect
the actual loading capacity. It is advisable to load the appliance just that a normal
circulation during washing is possible.
• Close the door. Make sure that no laundries are caught between the door and seal.
Control panel
Control panelControl panel
Control panel
1
1 1
1 EIN/AUS (
EIN/AUS (EIN/AUS (
EIN/AUS (Power
PowerPower
Power)
))
)
Press the button to switch the unit on and/or off.
2
2 2
2 Program selector switch
Program selector switchProgram selector switch
Program selector switch
To select a wash program, turn the program selector switch to the appropriate position.
3
3 3
3 STARTVORWAHL (Start delay)
STARTVORWAHL (Start delay)STARTVORWAHL (Start delay)
STARTVORWAHL (Start delay)
By repeatedly pressing the button, the program start can be changed about 3 / 6 / 9 / 12
(3+9) / 15 (6+9) / 18 (3+6+9) hours. Press the START/PAUSE button and the unit will
start automatically after the selected time has elapsed.