BOMANN WA 5721 - Troubleshooting

21
• Drain the water from the inlet hose and the water valve.
• Reconnect the inlet hose to the water valve.
Troubleshooting
TroubleshootingTroubleshooting
Troubleshooting
Before you contact an authorized specialist
Before you contact an authorized specialistBefore you contact an authorized specialist
Before you contact an authorized specialist
Control lamps
Control lampsControl lamps
Control lamps
Problem
ProblemProblem
Problem
Possible causes / Solution
Possible causes / SolutionPossible causes / Solution
Possible causes / Solution
flash
flash flash
flash light
light light
light -
- -
- -
- -
-
No water
supply
∙
Tap is not open, water supply not free
or water pressure too low.
blocked. ∙
Inlet hose is blocked, kinked,
squeezed.
flash
flash flash
flash -
- -
- light
light light
light -
- -
-
Water is not
pumped out
∙
Drain hose is blocked, kinked,
squeezed, not correctly connected
∙ Drain pump is blocked.
flash
flash flash
flash -
- -
- -
- -
- light
light light
light
Problem with
the unit door
∙ Door is not
properly closed or blocked
with laundry items.
flash
flash flash
flash light
light light
light -
- -
- light
light light
light
Strong vibration ∙
Have the transport bolts been r
moved?
∙ The appliance must stand on a
firm surface. ∙
Are the feet aligned?
flash
flash flash
flash light
light light
light light
light light
light -
- -
-
Water is
continuously
supplied
∙
Check inlet water pressure, reduce if
necessary. ∙
Close water supply and call
specialized.
flash
flash flash
flash light
light light
light light
light light
light light
light light
light
Problem with
heating
∙ Call specialized.
flash
flash flash
flash -
- -
- -
- -
- -
- -
-
Tub doesn’t
rotate
∙ Call specialized.
NOTE
NOTENOTE
NOTE:
::
:
If a problem still persists after
following the steps above, contact your distributor or an
authorized technician.
Possible causes / Solution
Possible causes / SolutionPossible causes / Solution
Possible causes / Solution
Tap is not open, water supply not free
or water pressure too low.
∙ Inlet filter
Inlet hose is blocked, kinked,
Drain hose is blocked, kinked,
squeezed, not correctly connected
properly closed or blocked
Have the transport bolts been r
e-
∙ The appliance must stand on a
Are the feet aligned?
Check inlet water pressure, reduce if
Close water supply and call
following the steps above, contact your distributor or an