EasyManua.ls Logo

BOMANN WA 5721 - Operation Cycle Management; Door Lock and Reloading Laundry; Changing Programs and Cycle Completion; Appliance Shutdown and Storage

BOMANN WA 5721
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Door lock
Door lockDoor lock
Door lock
Once a wash program has been started, the door cannot be opened.
A control lamp indicates the door lock.
When the wash cycle is finished, the door lock will automatically be unlocked after a few
minutes and the control lamp goes out.
Reloading laundry
Reloading laundryReloading laundry
Reloading laundry
WARNING:
WARNING:WARNING:
WARNING:
Never try to open the appliance door by force during the operation.
After program start you can add or remove laundry if necessary.
Stop the
process with the START/PAUSE button
. The appliance checks whether
refit and releases the door lock after a short time.
As soon as the water temperature or the water level exceeds a certain value, the door
remains locked for safety reasons and a reloading is not possible.
Changing the program
Changing the programChanging the program
Changing the program
To change the program,
stop the washing process with the START/PAUSE button
Select the desired program and start the new operation.
End of program
End of programEnd of program
End of program
At the end of the wash cycle, several beeps are sounded; a
few minutes later, the unit
goes into standby mode. The door lock will be unlocked.
Switch
SwitchSwitch
Switching
inging
ing
off
offoff
off
Switch off the appliance.
Close the water supply!
Leave the appliance door slightly open until the next wash cycle to avoid odors.
If the appliance is not in use for an extended period, d
isconnect the mains plug or
switch off or turn out the fuse.
When the wash cycle is finished, the door lock will automatically be unlocked after a few
Stop the
washing
. The appliance checks whether
it is possible to
As soon as the water temperature or the water level exceeds a certain value, the door
stop the washing process with the START/PAUSE button
.
few minutes later, the unit
Leave the appliance door slightly open until the next wash cycle to avoid odors.
isconnect the mains plug or

Related product manuals