Safety Instructions
• Rough handling of product may cause physical damage or malfunction.
• Never insert anything metallic into the monitor openings. Doing so may create the
danger of electric shock.
• To avoid electric shock, never touch the inside of the monitor. Only a qualified should
open the monitor’s case.
• Openings in the monitor cabinet are provided for ventilation. To prevent overheating,
these openings should not be blocked or covered.
• Put your monitor in a location with low humidity and a minimum of dust. Avoid places
like damp basement or dusty hallways.
• Place the monitor on a solid surface and treat it carefully. The screen is made of glass
and can be damaged if dropped or sharply hit.
• Do not attempt to remove the back cover, as you will be exposed to a shock hazard.
The back cover should only be removed by qualified service personnel.
• Unplug the monitor power before you connect external devices to the monitor.
• If your monitor does not operate normally, or if there are any unusual sounds or smells
coning from it, unplug it immediately and contact us.
• Please do not disassemble the monitor. No service will be provided in that case.
• Displaying fixed picture for a long time may cause an afterimage or dead spots. To
recover LCD pixels, display whole white picture on screen for a n hour or two and pixels
will be recovered.
• No service will be provided for user’s own color calibration.
3
To Next Page
Loading...
