Bona Edge UX - Replacing Cogged Belt; Cogged Belt Replacement - Part 2

EN
Bona Edge UX
17
Routine Maintenance (Cont.)
Remove the metal plate disc (Turn counter-clockwise).
3.
Remove the sawdust chamber metal sheet.
Replacing the cogged belt (Cont.)
4.
5.
6.
Remove the drive belt guard metal sheet. Remove 4 screws to divide the machine body from the
machine arm.
Remove the old cogged belt before from the motor pulley
and after from disc pulley.
7.
Fit a new cogged belt on the motor pulley and then on the disc
pulley.
8.
Reassemble all parts.
9.