Bona Edge UX
16
Routine Maintenance (Cont.)
If Velcro disc is worn, scrape
the disc off with a knife.
1.
Clean the steel disc with
alcohol or similar.
2.
Glue a new Velcro disc on the
steel plate.
3. 4.
Check that the disc is
centered: a disc that is
not centered may cause
unbalances and vibrations.
Replacing the Velcro disc
Remove the black stopper on the arm machine.
1.
In order to remove the screw and the tapered washer, you
need rst lock the disc pulley. For this purpose to put a
screwdriver inside the arm hole.
2.
Replacing the cogged belt
To Next Page
Loading...
