Bona Edge UX - Component Replacement Procedures; LED Strip Replacement; Dust Capture Strip Replacement; Minor Component Maintenance

EN
Bona Edge UX
19
Routine Maintenance (Cont.)
Replacing led strip
Follow the 'Graphite brushes'
(pag.17) up to point 3.
1. 2.
Remove 2 screws on the led guard and replace led strip.
3.
Reassemble all parts.
Replacing dust capture strip
Follow the 'Replacing the
cogged belt' (pag.16) up to
point 3.
1. 2.
Remove 2 screws on the side arm and internal plate.
Sawdust chamber
Disc
Hoover the sawdust from the chamber regularly to prevent the hazardous accumulation of dust.
Check the disc surface regularly. Remove any dirt.