EasyManua.ls Logo

BONAIRE VSS55 User Manual

BONAIRE VSS55
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Bonaire Integra
&
Fresh Air Conditioning
Installation Instructions
VSS50, 55 VSM60, 65
VSL70, 75
Question and Answer IconNeed help?

Do you have a question about the BONAIRE VSS55 and is the answer not in the manual?

BONAIRE VSS55 Specifications

General IconGeneral
BrandBONAIRE
ModelVSS55
CategoryAir Conditioner
LanguageEnglish

Summary

Introduction and Pre-Installation

Important Notes

Copyright, rights reserved, and product development notices from Climate Technologies.

Dealer and Installer Responsibilities

Outlines the crucial roles and obligations of dealers and installers for correct installation and compliance.

Safety and O.H.&S. Requirements

Ensures a safe installation environment and access for service, adhering to safety standards.

Before Commencing

Pre-installation checks including packaging, components, and system design conformity.

Unit Location

Unit Location Check List

Ensures proper placement for performance, access, noise, and structural integrity.

Unit Installation

Installing the Dropper Duct

Guidance on selecting, locating, and securely fixing the metal dropper duct.

Installing the Enviroseal Duct Shutter

Step-by-step instructions for correctly installing the Enviroseal duct shutter.

Installing the Air Conditioner

Procedures for safely removing and installing the main air conditioner unit.

Installing the Duct Work

Guidelines for installing insulated ductwork, bends, and joins for optimal airflow.

Connections

Water Management

Importance of correct water management for system operation, longevity, and warranty.

Inlet Water

Instructions for fitting the float valve and connecting the water supply.

Water Drain Connections

Procedures for fitting overflow assembly, Enviroflow system, and discharge provisions.

Electrical

Critical notes, connections, and diagram for safe and compliant electrical installation.

Commissioning

Water Levels

Ensuring correct water levels for operation and adjusting the float valve arm.

Dialflow Settings

Adjusting filter rate and bleed rate for optimal system performance and longevity.

Dump Valve Settings

Setting dump valve timing based on water hardness for effective water management.

Fan Operation

Checking fan running, venturi clearance, and air distribution through ductwork.

Controls

Referencing specific instructions for control installation and commissioning.

Customer Hand Over

Instructing the customer on product operation, features, and maintenance requirements.

Commissioning Check List

A comprehensive checklist to verify all installation and operational aspects before completion.

Service

Ductwork and general checks

Verifying Enviroseal function, roof penetrations, ductwork airtightness, and air distribution.

Site and Customer Hand Over

Ensuring site cleanliness and providing final instructions to the customer on operation and maintenance.

Related product manuals