Do you have a question about the BOND MANUFACTURING 67380-D and is the answer not in the manual?
Important safety warnings regarding gas leaks, flammable vapors, and outdoor use.
Adherence to codes, outdoor use, propane only, and specific warnings about lava rocks.
Attach handle (D) to lid (A) using cushions (AA).
Secure handle (D) to lid (A) from underneath with washers (BB, CC) and nuts (DD).
Place pumice stones (C) into the fire pit body (B).
Place propane tank in holder (F) and secure with wing screw.
Connect regulator to cylinder valve clockwise; hand-tighten connections.
Place lid (A) onto body (B) and lock by turning clockwise.
Perform a leak test using a soap and water mixture on connections before operation.
Remove lid, push and turn control knob (G) counterclockwise to ignite piezo.
Push and turn control knob (G) clockwise to turn off; lock lid after cooling.
Troubleshoot issues with the igniter, electrode wire, or gas flow for the heating unit.
Address issues when the burner fails to light, especially when using a match.
Identify causes and solutions for the heating unit emitting excessive black smoke.
Resolve issues related to sudden drops in gas flow, including kinks or safety valves.
Diagnose and fix problems where the flame blows out easily due to wind or gas flow.
| Product Name | BOND MANUFACTURING 67380-D |
|---|---|
| Product Type | Outdoor Fireplace |
| Material | Steel |
| Color | Black |
| Assembly Required | Yes |
| BTU | 50, 000 |
| Fuel Type | Propane |
| Finish | Powder-coated |
| Heat Output | 50, 000 BTU |
| Warranty | 1 year limited |
Loading...