EasyManua.ls Logo

BOND MANUFACTURING Gatewood 50436 - User Manual

Default Icon
14 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DANGER
WARNING
WARNING
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open ame.
3. If odor continues, keep away from
the appliance and immediately call
your gas supplier or re department.
Do not store or use gasoline or other
ammable vapors and liquids in the
vicinity of this or any other appliance.
An LP-cylinder not connected for use
shall not be stored in the vicinity of
this or any other appliance.
For outdoor use only.
Owner’s Manual
Gatewood Gas Fire Table
Item# 50436
Lowe’s# 733486
SERIES
Improper installation, adjustment, alteration, service or maintenance can cause injury or
property damage. Read the owner’s manual thoroughly before installing or servicing this
equipment. If the information in this manual is not followed exactly, a re or explosion may
result causing property damage, personal injury or loss of life.
Save these instructions for future use. If
you are assembling this unit for someone
else, give this manual to him or her and
read and save for the future.

Table of Contents

Questions and Answers

  • D
    Dr. Desiree FosterAug 4, 2025
    Why my BOND MANUFACTURING Outdoor Fireplace heating unit won’t light?
    • S
      Stephen MaddoxAug 4, 2025
      If your BOND MANUFACTURING Outdoor Fireplace heating unit won’t light, several factors could be at play. First, ensure that your gas tank isn’t empty, and the regulator is securely tightened to the tank. Another possible cause is a loose or disconnected electrode wire; try reconnecting it to the igniter box located inside the table behind the igniter box. If the igniter pin is broken or the electrode wire is shorting between the valve and igniter pin, contact Bond Manufacturing for a replacement part.
  • J
    Jason DavenportAug 10, 2025
    What to do if my BOND MANUFACTURING Outdoor Fireplace burner won’t light?
    • D
      Daniel NguyenAug 10, 2025
      If the burner of your BOND MANUFACTURING Outdoor Fireplace won’t light, the gas flow might be obstructed. Inspect all hoses for any kinks and bends that could be restricting the gas supply.
  • E
    Elizabeth RichardsAug 15, 2025
    How to unclog burner ports on BOND MANUFACTURING Outdoor Fireplace?
    • W
      wongsarahAug 15, 2025
      If the burner ports on your BOND MANUFACTURING Outdoor Fireplace are clogged, turn off all gas flow connections. Then, insert an opened paperclip (or similar item) into each of the burner ports to clear out any obstructions.
  • T
    Timothy GillAug 22, 2025
    What to do if the igniter battery is incorrectly inserted in BOND MANUFACTURING Outdoor Fireplace?
    • D
      David HollandAug 22, 2025
      If the igniter battery in your BOND MANUFACTURING Outdoor Fireplace is incorrectly inserted, check the direction in which the battery is inserted and correct it.
  • P
    Paul HurstAug 27, 2025
    How to dry igniter pin and burner on BOND MANUFACTURING Outdoor Fireplace?
    • A
      Ashley BensonAug 28, 2025
      If the igniter pin and burner of your BOND MANUFACTURING Outdoor Fireplace are wet, dry them off with a soft cloth.

Summary

Safety Information

General Safety Precautions

Covers essential safety rules for operation, including outdoor use and fuel handling.

Gas Handling and Leak Detection

Provides instructions for safe handling of propane tanks and detecting gas leaks.

Clearance Requirements

Specifies minimum distances from combustible materials around the unit.

Hardware List

Contents and Parts

Assembly Instructions

Panel and Body Assembly

Connects side, back, and door panels to form the main structure.

Burner and Table Top Installation

Installs the burner assembly and attaches the table top securely.

Propane Tank and Gas Connection

Positions the propane tank and connects the regulator to the cylinder valve.

Operation Guide

Lighting the Fire Table

Step-by-step instructions for safely igniting the gas fire table.

Extinguishing the Fire Table

Procedure for safely turning off the gas fire table.

Maintenance Procedures

Troubleshooting Common Issues

Warranty Information

Contact Information

BOND MANUFACTURING Gatewood 50436 Specifications

General IconGeneral
TypeOutdoor Fireplace
Model Number50436
BrandBond Manufacturing
NameGatewood
MaterialSteel
Fuel TypeWood
Assembly RequiredYes

Related product manuals