EasyManua.ls Logo

BOND MANUFACTURING BH7001-4 User Manual

BOND MANUFACTURING BH7001-4
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
WARNING:
Use Li
q
uid Pro
p
ane Gas
(
LP-Gas
)
Onl
y
!
Pro
p
ane c
y
linders sold se
p
aratel
y
.
WARNING:
Improper installation, adjustment, alteration,
service or maintenance can cause injury or
property damage. Read the owners manual
thoroughly before installing or servicing this
equipment. If the information in this manual is
not followed exactly, a fire or explosion may
result causing property damage, personal injury
or loss of life. Save these instructions for future
use. If you are assembling this unit for someone
else, give this manual to him or her to read and
save for the future.
WARNING:
Turn off gas supply when the appliance is not
in use.
WARNING:
This appliance must be attended at all times.
WARNING:
Battery may contain mercury. Do not
deposit in fire or put in trash. Recycle the
battery as hazardous waste.
WARNING:
The propane cylinder must be discon-
nected when appliance is not in use.
OWNER’S MANUAL
READ BEFORE USE! Model No.: BH7001-4 Item No.: 67906
WARNING
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
An LP cylinder not connected for use
should not be stored in the vicinity of this or
any other appliance.
Service must be performed by a
qualified installer, service agency or the
gas supplier.
DANGER
IF YOU SMELL GAS:
1. Shut off gas to the appliance
2. Extinguish any open flame
3. If odor continues, keep away from the
appliance and call your gas supplier or
fire department immediately.
Design certified under ANSI Z21.97
CSA 2.41-(2012) Requirements
for Outdoor Gas Fireplaces
CARBON MONOXIDE HAZARD
This appliance can produce carbon monoxide which
has no odor.
Using it in an enclosed space can kill you.
Never use this appliance in an enclosed space such
as a camper, tent, car or home.
DANGER
If the appliance is stored indoors, detach
and leave LP-Gas cylinder outdoors.
For Outdoor use Only!

Questions and Answers:

BOND MANUFACTURING BH7001-4 Specifications

General IconGeneral
BrandBOND MANUFACTURING
ModelBH7001-4
CategoryOutdoor Fireplace
LanguageEnglish

Summary

Safety Information

Outdoor Use and Gas Type

Appliance is for outdoor use only and requires Liquid Propane gas. Do not use natural gas.

Gas Leak Procedure

Instructions for responding to the smell of escaping gas, including shutting off the supply.

General Safety Warnings

Covers unattended operation, surface temperatures, combustible materials clearance, and children's supervision.

Warranty and Installation

Warranty Limitations

Bond disclaims responsibility for modifications, non-approved parts, or improper installation.

Assembly Instructions Overview

Guidance on unboxing, preparing the firebowl, and disconnecting the regulator.

Operation Procedures

LP Gas Supply Connection

Steps for connecting and disconnecting the propane cylinder to the appliance.

Selecting a Location

Guidelines for placing the appliance on a level, non-combustible surface with proper clearances.

Leak Test Procedure

Instructions for performing a leak test using a soap solution before operating the appliance.

Lighting the Appliance

Step-by-step guide for lighting the pilot and main burner, including initial start procedures.

Extinguishing the Fire

Procedure for safely turning off the main burner, pilot flame, and gas supply.

Routine Care and Maintenance

Tips for cleaning, protecting, and storing the appliance, including handling stubborn stains.

Troubleshooting Guide

Pilot Not Lighting

Addresses issues like wet igniter, incorrect battery, or loose electrode wire.

Pilot or Main Burner Not Lighting

Covers no gas flow, obstructed lines, or clogged burner ports.

Black Smoke Emission

Troubleshooting for excessive black smoke, often related to obstructed burner ports.

Gas Flow Issues

Addresses sudden drops in gas flow due to excess flow valve activation or kinks.

Flame Blow Out

Covers issues like gusting winds or excess flow safety valve activation.

Irregular Flame Pattern

Diagnoses issues with flame not covering the entire burner length, usually due to clogged ports.

Related product manuals