EasyManua.ls Logo

Bond HYFP50095-3 - User Manual

Default Icon
35 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner’s Manual
Petra Gas Fire Pit
Item# 66600
Model# HYFP50095-3
DANGER
WARNING
WARNING
WARNING
If you smell gas:
1. Shut off gas to the appliance.
3. If odor continues, keep away from
the appliance and immediately call
Do not store or use gasoline or other
vicinity of this or any other appliance.
An LP-cylinder not connected for use
shall not be stored in the vicinity of
this or any other appliance.
Impoper installation, adjustment, alteration, service or maintenance can cause injury or
property damage. Read the owner’s manual thoroughly before installing or servicing this
result causing property damage, personal injury or loss of life.
Save these instructions for future use. If you are
assembling this unit for someone else, give this
manual to him or her and read and save for the
future.
For outdoor use only.
equpment. If the information in this manual is not followed exactly, a fire or explosion may
flammable vapours and liquids in the
2. Extinguish any open flame.
your gas supplier or fire department.

Table of Contents

Questions and Answers

  • K
    Kent FloresAug 6, 2025
    What to do if my Bond HYFP50095-3 Outdoor Fireplace heating unit won’t light?
    • E
      emurphyAug 6, 2025
      If your Bond Outdoor Fireplace heating unit won’t light, several factors could be the cause. First, check if the gas tank is empty and ensure the regulator is securely connected to the tank. Tighten the connection if it's loose. Also, the electrode wire may be loose or disconnected; reconnect it to the igniter box located inside the table behind the igniter box. If the igniter pin is broken or the electrode wire is shorting, contact Bond Manufacturing for a replacement part.
  • S
    Stephen JenningsAug 14, 2025
    Why won't the burner light on my Bond Outdoor Fireplace?
    • A
      Amy JohnsonAug 14, 2025
      If the burner on your Bond Outdoor Fireplace won’t light, it could be due to obstructed gas flow or clogged burner ports. Check all hoses for kinks and bends that may be obstructing gas flow. If the burner ports are clogged, turn off all gas flow connections and use an opened paperclip (or similar item) to clear each of the burner ports.
  • D
    Dr. Kelly GatesAug 27, 2025
    What to do if igniter pin and burner are wet in Bond Outdoor Fireplace?
    • N
      Natasha JohnsonAug 27, 2025
      If the igniter pin and burner of your Bond Outdoor Fireplace are wet, dry them off with a soft cloth.

Summary

Safety Information

General Safety Precautions

Key safety warnings and precautions for using the propane gas fire pit.

Assembly Instructions

Operation

How to Light the Fire Pit

Step-by-step guide for igniting the propane gas fire pit.

How to Extinguish the Fire Pit

Procedure for safely turning off the propane gas fire pit.

Maintenance

Envirostone Surface Care

Recommendations for cleaning and maintaining the Envirostone™™ surface.

Troubleshooting

Warranty

Contact

Bond HYFP50095-3 Specifications

General IconGeneral
BrandBond
ModelHYFP50095-3
CategoryOutdoor Fireplace
LanguageEnglish

Related product manuals