Bond Belden User Manual

manual to him or her to r
ead and save for the
Owner’
s Manual
DANGER
W
ARNING
WARNING
WARNING
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open ame.
3. If odor continues, keep away from
the appliance and immediately call
your gas supplier or re department.
Do not store or use gasoline or other
ammable vapors and liquids in the
vicinity of this or any other appliance.
An LP-cylinder not connected for use
shall not be stored in the vicinity of
this or any other appliance.
Improper installation, adjustment, alteration, service or maintenance can cause injury or
property damage. Read the owner’s manual thoroughly before installing or servicing this
equipment. If the information in this manual is not followed exactly, a re or explosion may
result causing property damage, personal injury or loss of life.
Save these instructions for futur
e use. If you are
assembling this unit for someone else, give this
future.
For outdoor use only
.
HYFP50095
Item# 51348A
Model# HYFP50025-1
Belden 30 Gas Fire Table
"

Bond Belden Specifications

General

Brand	Bond
Model	Belden
Category	Outdoor Fireplace
Language	English

Summary

Safety Information

General Safety Guidelines

Covers operational, gas handling, material use, and proximity safety rules for the appliance.

Specific Safety & Preparation

Details clearance requirements, pre-use inspection, and assembly preparation notes.

Hardware

Assembly Preparation and Tools

Guidance on verifying parts, estimated assembly time, and necessary tools.

Contents

Assembly Instructions

Initial Setup and Leg Attachment

Performing initial checks and attaching the legs to the metal stand base.

Attaching Side and Front Panels

Securing the side panels and front panel to the assembled legs.

Table Top and Door Assembly

Connecting the table top to the base and installing the door with its knob.

Regulator Hose Connection

Ensuring the regulator hose is securely attached to the designated bracket.

Propane Tank and Lava Rocks Setup

Placing the propane tank and adding lava rocks to the firebowl.

Operation

Leak Testing Procedure

Steps for performing a leak test using soap and water mixture.

Lighting and Flame Adjustment

Instructions for lighting the unit and adjusting flame height.

Extinguishing the Unit

Procedure for safely turning off the fire table and closing the gas valve.

Maintenance

General Maintenance Precautions

Guidelines for pre-maintenance checks, cleaning, and part usage.

Envirostone Surface Care

Recommendations for cleaning and protecting the Envirostone surface.

Troubleshooting

Heating Unit Issues

Solutions for problems like the unit not lighting or burner issues.

Gas Flow and Flame Problems

Troubleshooting for gas flow drops, black smoke, and flame blowouts.

Warranty

Contact Information