Only use the r
egulator and hose assembly provided with this unit. Replacement parts must be supplied
directly by Bond Manufacturing Co., Inc.
Inspect the burner before use of this unit. If the burner shows any kind of damage, do not operate
the appliance. For assistance with repair or replacement of the burner or any other parts, calls Bond
Manufacturing Co., Inc. at 1.866.771.2663.
NOTE: You must follow all steps to properly assemble this heating item. Make sure the gas
valve is turned “OFF” before assembling. Do NOT attempt to assemble without proper tools.
SAFETY INFORMA
TION
Combustible materials should not be within 72
inches of the top of the unit, or within 48 inches
ar
ound the entire unit.
Min.
Clearance
48 in. (121.9 cm)
Min. Clearance
72 in. (182.88 cm)
Min. Clearance
48 in. (121.9 cm)
Bond Manufacturing Co., Inc. | Page 4
To Next Page
Loading...
