Bond 67836 User Manual

Owner’s Manual
AURORA
STEEL
GAS
FIRE
BOWL
Save these instructions for futur
e use. If you ar
e
assembling this unit for someone else, give this
manual to him or her and r
ead and save for the
futur
e.
DANGER
WARNING
WARNING
WARNING
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open ame.
3. If odor continues, keep away from
the appliance and immediately call
your gas supplier or re department.
Do not store or use gasoline or other
ammable vapors and liquids in the
vicinity of this or any other appliance.
An LP-cylinder not connected for use
shall not be stored in the vicinity of
this or any other appliance.
Improper installation, adjustment, alteration, service or maintenance can cause injury or
property damage. Read the owner’s manual thoroughly before installing or servicing this
equipment. If the information in this manual is not followed exactly, a re or explosion may
result causing property damage, personal injury or loss of life.
For outdoor use only.
Item# 67836
Model# PGF5820-2

Bond 67836 Specifications

General

Brand	Bond
Model	67836
Category	Outdoor Fireplace
Language	English

Summary

Safety Warnings and Hazards

Gas Leak Detection Procedure

Steps to follow if a gas leak is detected, including shutting off gas and immediate actions.

Flammable Vapors and Storage Warning

Prohibits storing or using flammable vapors and liquids near the appliance.

Carbon Monoxide Hazard

Danger of odorless carbon monoxide; use only in ventilated outdoor spaces.

General Safety Guidelines

Installation and Fuel Requirements

Adhere to codes; use only propane gas; no solid fuels.

Propane Tank Safety

Use tanks with collars, do not overfill, ensure vapor withdrawal, check for damage.

Operational Safety Rules

Keep flammable items away, do not move when hot, never leave unattended.

Continued Safety Precautions

Clearance and Fire Safety

Maintain safe distances from combustible materials and high temperatures.

Child Safety and Supervision

Children must not operate unit and require supervision when near it.

Unit Placement and Lid Usage

Do not place on artificial desks; cool unit before placing lid.

Pre-Assembly Safety and Preparation

Hose and Regulator Usage

Only use the provided regulator and hose assembly.

Burner Inspection

Inspect the burner for damage before use; contact manufacturer for repair.

Assembly Requirements

Follow steps carefully; ensure gas valve is OFF; use proper tools.

Hardware Components

Hardware List

List of hardware items including cushions, washers, and nuts with quantities.

Product Contents and Diagram

Parts Identification

Diagram showing all parts of the firebowl with a list of item descriptions and quantities.

Assembly Instructions

Attaching the Handle

Steps 1-2: Attach handle to lid using cushions, washers, and nuts.

Placing Pumice Stones

Step 3: Place pumice stones into the body of the unit.

Securing the Propane Tank

Step 4: Place propane tank in holder and tighten with wing screw.

Connecting the Regulator

Step 5: Attach regulator to cylinder valve by turning coupling nut clockwise.

Attaching the Lid

Step 6: Cover body with lid and lock by turning clockwise.

Operation

Leak Test Procedure

Perform leak test with soap and water mixture on connections before use.

Lighting the Firepit

Remove lid, push and turn control knob counterclockwise to ignite piezo ignition.

Extinguishing the Firepit

Push and turn control knob clockwise to turn off firepit.

Maintenance

Cleaning and Inspection

Disconnect gas tank; keep unit clean and free from debris; inspect burner.

Storage and Care

Store unit away from direct sunlight; keep lid on when not in use.

Troubleshooting

Heating Unit Won't Light

Solutions for wet igniter, broken pin, loose electrode wire, or no gas flow.

Burner Issues

Troubleshoot burner not lighting, black smoke, sudden gas drop, or flame blowing out.

Warranty and Contact Information

Warranty Void Conditions

Manufacturer warranty voided by modification, non-approved parts, or improper use.

Contacting Support

Information for contacting Bond Manufacturing via phone, email, or website.