Bond Manufacturing Company | Page 8
ASSEMBLY INSTRUCTIONS
4. Put the 20 lb. propane gas tank (not included)
into the tank holder (F). Turn the wing screw on
the outside of the tank holder (F) clockwise to
tighten the tank into the tank holder.
CYLINDER V
AL
VE
PRESSURE
RELIEF V
AL
VE
BLEED-OFF
V
AL
VE
BLACK COUPLING NUT
REGULA
TOR
tur
n clockwise to connect
tur
n clockwise
to r
eseal
5. Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the preassembled regulator from
the hose to the cylinder valve by turning
the regulator coupling nut clockwise.
Make sure it is fastened securely and
tighten connections by hand only.
6. Cover body (B) with lid (A). To lock lid
(A) in place, tur
n clockwise. To unlock, turn
counterclockwise.
F
A
B
Propane tank must be a minimum of 60 inches
away at all times.
DANGER
To Next Page
Loading...
