Bond Belden - Assembly Instructions; Initial Setup and Leg Attachment; Attaching Side and Front Panels

1-866-771-2663 | Page 7
3. Attach the 2 side panels (E) and front panel (D)
to the legs using 12 pcs M6 x 10 screws (AA) .
M
ASSEMBL
Y INSTRUCTIONS
1. Check that the control knob (M) for the gas
supply system is turned to the “OFF” position
before starting any assembly.
2. Attach right front leg (H), right back leg (I) ,left
front leg (G) and left back leg (F) to the metal stand (J)
using 4 pcs M6 x 20 screws (FF).
G
H
I
J
FF
F
E
D
E
AA