Bond Belden - Table Top and Door Assembly; Regulator Hose Connection

ASSEMBL
Y INSTRUCTIONS
5. Insert the door (C) to right fr
ont leg and attach
door knob (DD) to the door using 1 M4 x 8 screw
(BB) and 1 washer (CC).
6. Attach hose of regulator tightly to the bracket.
4. Attach steel base to the bottom part of the
table top (B) using 8pcs M6x10 screws (AA).
B
AA
C
DD
CC
BB
Bond Manufacturing Co., Inc. | Page 8