Boneco H300 Manual

14
en
The selected performance level is indicated by the
number of LEDs that light up above the knob.
3. Briefly press the knob once to exit manual mode
and to reactivate AUTO mode.
4. Briefly press the knob once more to switch o the
appliance.
If you exit AUTO mode, the appliance will con-
tinue at the selected performance level until
the water base is empty, regardless of what the cur-
rent level of humidity is.
MANUAL CONTROL
1. Briefly press the knob once to switch on the ap
-
pliance.
The appliance is always in AUTO mode when it is
switched on.
2. Adjust the output to your needs by setting the
knob to the desired level from 1 to 6. This action
exits AUTO mode (AUTO LED is o).

Boneco H300 Specifications

General

Timer	Yes
Noise level	51 dB
Air purify rate	90 m³/h
Number of speeds	6
Water tank capacity	4.5 L
Suitable for room area up to	50 m²
AC input voltage	100 - 240 V
AC input frequency	50 / 60 Hz
Power consumption (max)	9.6 W
Power consumption (standby)	0.6 W
Placement	Floor
Product color	Black, White
Built-in display	No

Weight and Dimensions

Width	280 mm
Height	465 mm
Weight	5500 g