Boneco H300 Manual

18
en
THE BENEFITS OF THE BONECO APP
ABOUT THE BONECO APP
The “BONECO healthy air” app is used to control the
appliance and lets you take full advantage of its po-
tential. The app includes functions such as a timer, a
humidity preset and the option to switch between
various programs. In addition, it provides remind-
ers for the cleaning intervals and other recurring
tasks.
SCOPE OF SERVICES
Operating modes “Hybrid” The air is cleaned and humidified at the same time
“Purifier” The air is cleaned, but not humidified
“Humidifier” The air is humidified, but not cleaned
Selecting modes Predefined settings for frequent situations
AUTO mode The appliance uses all fan levels from 1 to 5 and has a preset target
humidity of 50%
SLEEP mode The appliance uses fan level 1 only and increases the target humidity
to 45%
BABY mode The appliance uses fan level 1 through 4 and increases the humidity
to 60%
Hygrostat Defines the desired humidity
Dimmer Sets the brightness of the status LED
Weather Displays the current weather and outside temperature
Filter change information Indicates when an AH300 pollen filter is spent
Accessories and consumables Provides support in replacement orders and further information

Boneco H300 Specifications

General

Timer	Yes
Noise level	51 dB
Air purify rate	90 m³/h
Number of speeds	6
Water tank capacity	4.5 L
Suitable for room area up to	50 m²
AC input voltage	100 - 240 V
AC input frequency	50 / 60 Hz
Power consumption (max)	9.6 W
Power consumption (standby)	0.6 W
Placement	Floor
Product color	Black, White
Built-in display	No

Weight and Dimensions

Width	280 mm
Height	465 mm
Weight	5500 g