Boneco H300 Manual

24
en
CLEANING THE PRE-FILTER
ABOUT THE PRE-FILTER
The pre-filter cleans coarse contaminants from the
air. Clean the pre-filter if it is dusty or dirty.
CLEAN THE PRE-FILTER
1. Press down each of the four corners of the cover
in sequence to unlock it.
2. Remove the pre-filter by pulling it upwards by
the lug in its center.
3. Wash the pre-filter under running water using a
cleaning brush.
4. Dry the pre-filter with a cloth.
5. Insert the pre-filter into the appliance.
6. Attach the cover.

Boneco H300 Specifications

General

Timer	Yes
Noise level	51 dB
Air purify rate	90 m³/h
Number of speeds	6
Water tank capacity	4.5 L
Suitable for room area up to	50 m²
AC input voltage	100 - 240 V
AC input frequency	50 / 60 Hz
Power consumption (max)	9.6 W
Power consumption (standby)	0.6 W
Placement	Floor
Product color	Black, White
Built-in display	No

Weight and Dimensions

Width	280 mm
Height	465 mm
Weight	5500 g