EasyManuals Logo

Boneco H300 Manual

Boneco H300
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
26
en
MALFUNCTIONS AND TROUBLESHOOTING
Problem Possible cause Action
Air has an unpleasant odor Stagnant water in the water base Drain the water base and clean the appliance and the
AW200 evaporator mat
No improvement in air quality Open windows or doors Close windows and doors
AUTO LED on the appliance flashes red The water base is empty Fill the water base
Appliance cannot be operated in the app.
The message “Searching …” “Non accessi
-
ble” appears
Appliance is blocked by another smartphone Close the app on the second smartphone
AUTO LED pulses The desired humidity has been reached or exceeded None needed
Current display flashes if handling is
attempted
Operation is blocked Disable the LOCK function in the app
Display remains dark The brightness of the LEDs has been heavily reduced
in the app
Increase the brightness of the LEDs in the app

Table of Contents

Other manuals for Boneco H300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Boneco H300 and is the answer not in the manual?

Boneco H300 Specifications

General IconGeneral
TimerYes
Noise level51 dB
Air purify rate90 m³/h
Number of speeds6
Water tank capacity4.5 L
Suitable for room area up to50 m²
AC input voltage100 - 240 V
AC input frequency50 / 60 Hz
Power consumption (max)9.6 W
Power consumption (standby)0.6 W
PlacementFloor
Product colorBlack, White
Built-in displayNo
Weight and Dimensions IconWeight and Dimensions
Width280 mm
Height465 mm
Weight5500 g

Related product manuals