Boneco H300 User Manual

MANUAL OPERATION
ON MANUAL OPERATION
The BONECO H300 offers extensive possibilities for control and automation, which are controlled by the BONECO app. Furthermore, some basic functions are available that you can
control manually using the knob on the front.
AUTO MODE
If you have never operated the BONECO H300 with the BONECO app and switch it on for the first time, the appliance will operate as a humidifier and air purifier in AUTO mode. The
appliance is preset to a target humidity of 50 percent. The performance level is automatically adapted to the current humidity: The drier the air, the higher the output level.
If the preset target humidity is exceeded by 2 percent, the appliance switches to standby mode, which is indicated by the pulsing LED:
If the humidity drops below the set level, the BONECO H300 resumes operation.
ADAPTED AUTO MODE
If you have already operated the BONECO H300 with the BONECO app and set a different humidity, that value is automatically taken over when it is switched on.
SWITCHING ON AND OFF
1. Briefly press the output regulator once to switch on tBONECO H300.
The appliance is always in AUTO mode when it is switched on. You can identify active AUTO mode

Boneco H300 Specifications

General

Timer	Yes
Noise level	51 dB
Air purify rate	90 m³/h
Number of speeds	6
Water tank capacity	4.5 L
Suitable for room area up to	50 m²
AC input voltage	100 - 240 V
AC input frequency	50 / 60 Hz
Power consumption (max)	9.6 W
Power consumption (standby)	0.6 W
Placement	Floor
Product color	Black, White
Built-in display	No

Weight and Dimensions

Width	280 mm
Height	465 mm
Weight	5500 g