SCOPE OF SERVICES
ON timer The appliance switches on after a set time
OFF timer The appliance switches off after a set time
Programs Predefined settings for frequent situations
Hygrostat Defining the desired humidity
Weather Displays the current weather and outside temperature
Filter change information Indicates when a AH300 POLLEN Filter is used up
SOURCE OF THE BONECO APP
BONECO APP FOR IOS
Search the App Store for “BONECO healthy air” or scan the QR code below. Reading the QR code under iOS 10 or earlier requires installing a corresponding app. Under iOS 11 and
later, the QR code is read automatically whenever you direct the camera at it.
APP FOR ANDROID
Search the Google Play Store for “BONECO healthy air” or scan the QR code below. Reading the QR code requires installing a corresponding app on your device.
CONNECTING THE APP TO THE BONECO H300
PREPARING FOR FIRST USE
• Make sure that Bluetooth is activated on your smartphone.
• During connection, make sure that the smartphone is in the same room as the BONECO H300.
Once connected successfully, you can control the BONECO H300 with your smartphone from the same room or even from an adjacent room. However, the maximum distance
between smartphones and BONECO H300 depends on the specific structural conditions.
CONNECTION
1. Make sure that Bluetooth is activated on your smartphone.
2. Start the BONECO app.
3. Follow the instructions in the app.
NOTES ON CLEANING
ABOUT CLEANING
Regular maintenance and cleaning are necessary for trouble-free and hygienic operations.
Recommended cleaning and maintenance intervals vary depending on air quality, water quality and length of operation.
Dishwashing liquid and a scrub brush are recommended for cleaning by hand.
Always unplug the BONECO H300 before you start cleaning! Failure to do so can result in electric shock and fatal injury!
To Next Page
Loading...
Need help?
General
Weight and Dimensions
