by the small LED that lights up above the output regulator.
2. To switch off the BONECO H300 while it is in AUTO mode, briefly press the output regulator once.
MANUAL OPERATION (CONTINUED)
MANUAL CONTROL
1. Briefly press the output regulator once to switch on the BONECO H300.
The appliance is always in AUTO mode when it is switched on.
2. Adjust the output to your needs by setting the control knob to the desired level from 1 to 6. This action exits AUTO mode (AUTO LED is off).
The selected performance level is indicated by the number of LEDs that light up above the output regulator.
3. Briefly press the control knob once to exit manual mode and to reactivate AUTO mode.
4. Briefly press the output regulator once more to switch off the BONECO H300.
If you exit AUTO mode, the BONECO H300 will continue at the selected output level until the water tank is empty – regardless of what the current level of humidity is.
THE VARIOUS OPERATING MODES
HYBRID MODE (“HYBRID”)
The BONECO H300 combines two functions.
The AH300 POLLEN Filter cleanses breathing air of pollen, household dust, and fine particles.
The evaporator mat humidifies the room air.
You achieve the best results if the BONECO H300 humidifies and purifies the air at the same time. Nevertheless, it is possible to use just one of the two functions.
HUMIDIFICATION ONLY (“HUMIDIFIER”)
We recommend using the BONECO H300 with inserted AH300 POLLEN Filter even in winter because, aside from pollen, it also filters household dust out of the air. In order to operate
the appliance without the AH300 POLLEN Filter, simply remove the filter from its holder.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
