Boneco H400 User Manual

12
en
MANUAL HANDLING
ON MANUAL HANDLING
Manual handling works conveniently by the knob
on the front side. The BONECO app oers additional,
extensive options for control and automation of the
BONECO appliance.
AUTO MODE
If you have never operated the BONECO appliance
with the BONECO app and switch it on for the first
time, it starts up in AUTO mode. The appliance is pre-
set to a target relative humidity of 50 percent. The
performance level is automatically adapted to the
current humidity: The drier the air, the higher the
performance level.
If the preset target humidity is exceeded, the appli-
ance switches to standby mode, which is indicated
by the pulsing LED.
If the humidity drops below the set level, the BONE-
CO appliance resumes operation.
ADAPTED AUTO MODE
If you have already operated the BONECO appliance
with the BONECO app and set a dierent humidity,
that value is automatically taken over when the ap-
pliance is switched on.
SWITCHING ON AND OFF
1. Briefly press the knob once to switch on the
BONECO appliance.
The appliance is always in AUTO mode when it is
switched on. You can identify active AUTO mode by
the small LED that lights up above the knob.
2. To switch o the BONECO appliance while it is in
AUTO mode, briefly press the knob once.

Boneco H400 Specifications

General

Noise level	55 dB
Control type	Buttons
Country of origin	Switzerland
Water tank capacity	12 L
Evaporation technology	Steam
Air purification capability	Yes
Suitable for room area up to	60 m²
Suitable for room volume up to	150 m³
Product color	White
AC input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Quantity	1

Weight and Dimensions

Depth	280 mm
Width	400 mm
Height	465 mm
Weight	6770 g