Boneco H400 User Manual

24
en
NOTES ON OPERATION AND TROUBLESHOOTING
Problem Possible cause Action
Air has an unpleasant odor Stagnant water in the water base Drain the water base and clean the appliance and the AW200
evaporator mat
AUTO LED on the appliance flashes red The water base is empty Fill the water base
Appliance cannot be operated in the
app. The message “Searching …”
“Cannot be found” appears
Appliance is blocked by another smartphone Close the app on the second smartphone
AUTO LED pulses The desired humidity has been reached or exceeded None needed
Current display flashes if operation is
attempted
Operation is blocked Disable the LOCK function in the app
Display remains dark The brightness of the LEDs has been heavily
reduced in the app
Increase the brightness of the LEDs in the app

Boneco H400 Specifications

General

Noise level	55 dB
Control type	Buttons
Country of origin	Switzerland
Water tank capacity	12 L
Evaporation technology	Steam
Air purification capability	Yes
Suitable for room area up to	60 m²
Suitable for room volume up to	150 m³
Product color	White
AC input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Quantity	1

Weight and Dimensions

Depth	280 mm
Width	400 mm
Height	465 mm
Weight	6770 g