20
en
CLEANING THE APPLIANCE
6. Clean the inside of the water tank by hand or with
a suitable cleaning brush using a commercially
available dish detergent.
7. Clean the water tank cover with a commercially
available dish detergent and a cleaning brush.
8. Put the appliance back together by following the
steps in reverse order.
4. Remove the AW200 evaporator mat from the
drum.
5. Clean the water base and the drum either by
hand or in the dish washer at a max. temperature
of 122 °F (50 °C).
DISASSEMBLY AND CLEANING
1. Take o the upper part of the BONECO appliance.
2. Remove the drum with the AW200 evaporator
mat.
3. Twist both drum discs to release them. When do-
ing so, note the markings on the outer side of the
disc.
122 °F
To Next Page
Loading...
