Boneco H400 User Manual

16
en
THE BENEFITS OF THE BONECO APP
ABOUT THE BONECO APP
The “BONECO healthy air” app is used for enhanced
control of the BONECO appliance and lets you take
full advantage of its potential. The app includes
functions such as a timer, a humidity preset and the
option to switch between various programs. In ad-
dition, it provides reminders for the cleaning inter-
vals and other recurring tasks.
SCOPE OF SERVICES
Operating
modes
“Hybrid” The air is cleaned and humidified at the same time
“Purifier” The air is cleaned, but not humidified
“Humidifier” The air is humidified, but not cleaned
Programs Predefined settings for frequent situations
AUTO mode The appliance uses all fan levels from 1 to 5 and has a preset target
humidity of 50%
SLEEP mode The appliance uses fan level 1 only and increases the
target humidity to 45%
BABY mode The appliance uses fan level 1 through 4 and increases the
humidity to 60%
Hygrostat Defining the desired humidity
Dimmer Setting the brightness of the status LED
Weather Displays the current weather and outside temperature
ON timer The appliance switches on after a set time
OFF timer The appliance switches o after a set time
Accessories and consumables Provides support in replacement orders and further information

Boneco H400 Specifications

General

Noise level	55 dB
Control type	Buttons
Country of origin	Switzerland
Water tank capacity	12 L
Evaporation technology	Steam
Air purification capability	Yes
Suitable for room area up to	60 m²
Suitable for room volume up to	150 m³
Product color	White
AC input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Quantity	1

Weight and Dimensions

Depth	280 mm
Width	400 mm
Height	465 mm
Weight	6770 g