Automatic cooking
All the cooking zones are equipped with an automatic “go and stop” cooking device. The cooking
zone starts at full power during a certain time, then reduces automatically its power on the pre-
selected level.
• Start-up :
Action Control panel Display
Zone selection press display [ 0 ] selected [ 0 ] and control light on
Full power setting slide on the “SLIDER“ to [ 9 ] pass from [ 0 ] to [ 9 ]
Automatic cooking re-press on display “SLIDER“ [ 9 ] [ 9 ] is blinking with [ A ]
Power level selection slide on the “SLIDER“ to [ 7 ] [ 9 ] pass to [ 8 ] [ 7 ]
(for example « 7 ») [ 7 ] is blinking with [ A ]
• Switching off the automatic cooking :
Action Control panel Display
Zone selection press [ 7 ] from the zone [ 7 ] blinking with [ A ]
Power level selection slide on the “SLIDER“ [ 1 ] to [ 9 ]
Pause function
This function brakes all the hob’s cooking activity and allows restarting with the same settings
• Startup/stop the pause function :
Action Control panel Display
Engage pause press “Pause/Recall” key during 2s displays [ II ] in the
heating zone displays
Stop the pause press “Pause/Recall” key during 2s pause control light is blinking
press an other touch or pause control light is off
slide on the “SLIDER“
Recall Function
After switching off the hob (0/I), it is possible to recall the last settings.
• cooking stages of all cooking zones (power)
• minutes and seconds of programmed cooking zone-related timers
• Heat up function
The recall procedure is following:
• Press the key [0/I]
• Then press the key [ II ] within 6 seconds
The precedent settings are activated.
To Next Page
Loading...
