EasyManua.ls Logo

Borri INGENIO PLUS - Page 36

Borri INGENIO PLUS
203 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation and start-up of INGENIO PLUS UPS 30÷40 kVA
Installazione e avviamento INGENIO PLUS UPS 30÷40 kVA
OMS02082 REV. D
19
3.3 POSITIONING AND INSTALLATION
The INGENIO PLUS UPS 30÷40 kVA must be installed indoor, in a clean and dry room,
preferably without dust or humidity infiltrations. For the environmental conditions in the place of
installation, in compliance with the current legislation, please refer to the “Overall dimensions,
minimum distances from the walls and ventilation” section.
Special environmental conditions
It is necessary to implement specific protective measures in case of unusual
environmental conditions:
harmful smoke, dust, abrasive dust;
humidity, vapour, salt air, bad weather or dripping;
explosive dust and gas mixture;
extreme temperature variations;
bad ventilation;
conductive or radiant heat from other sources;
fungus, insects, vermin.

Related product manuals