Bosch 2 - Page 10

English | 29
Bosch Power Tools 3 609 929 B34 | (3.4.08)
Industrial Cordless Angle Wrench ANGLE EXACT 14CF 22CF 29CF
Article number
–Europe:0602490...
... 690 ... 693 ... 691
Max. torque for hard screwdriving application, right
rotation*
Nm 10 16 20
No-load speed n
0
, right rotation* rpm 340 440 300
Rated voltage
V9.614.4 14.4
Rotational direction
Weight according to EPTA-Procedure 01/2003 kg 1.0 1.5 1.5
Degree of protection
IP 20 IP 20 IP 20
* In left rotation, the power tools run slower and transmits less torque. The speed and torque at the tool bit changes
in accordance with the reduction ratio of the flat drive.
Industrial Cordless Angle Wrench ANGLE EXACT 7–900 10–650 14–420
Article number
–Europe:0602492...
... 611 ... 609 ... 607
Max. torque for hard/soft screwdriving application
according to ISO 5393
Nm 7/6,5 10/9 14/14
No-load speed n
0
rpm 900 650 420
Rated voltage
V9.69.6 9.6
Rotational direction
Weight according to EPTA-Procedure 01/2003 kg 1.0 1.0 1.0
Degree of protection
IP 20 IP 20 IP 20
Industrial Cordless Angle Wrench ANGLE EXACT 25–250 30–380 40–280 50–210
Article number
–Europe:0602492...
... 605 ... 603 ... 601 ... 613
Max. torque for hard/soft screwdriving application
according to ISO 5393
Nm 25/20 30/25 40/35 45/45
No-load speed n
0
rpm 245 380 280 210
Rated voltage
V9.614.4 14.4 14.4
Rotational direction
Weight according to EPTA-Procedure 01/2003 kg 1.6 1.6 1.6 1.6
Degree of protection
IP 20 IP 20 IP 20 IP 20
OBJ_BUCH-412-001.book Page 29 Thursday, April 3, 2008 3:18 PM