30 | English
3 609 929 B34 | (3.4.08) Bosch Power Tools
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 70 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Screwdriving without impact: Vibration emis-
sion value a
h
<2.5 m/s
2
, Uncertainty
K=1.5m/s
2
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.The declared vibration emission level
represents the main applications of the tool.
However if the tool is used for different applica-
tions, with different accessories or poorly main-
tained, the vibration emission may differ. This
may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Ni-Cd Battery Pack 9.6 9.6 14.4 14.4
Article number
–Europe:2607335...
– North America: 2 607 335 ...
... 373
... 453
... 659
... 759
... 657
... 761
... 655
... 763
Number of cells
8 81212
Battery voltage
V9.69.6 14.4 14.4
Capacity
Ah 1.7 2.4 1.7 2.4
Weight according to EPTA-Procedure 01/2003
kg 0.4 0.5 0.6 0.8
Angled drive head 1/4" 3/8" 3/8" 1/4" QC 1/4"
Article number 0 607 ...
... 453 617 ... 453 620 ... 451 618 ... 453 618 ... 453 630
Maximum torque, hard
screwdriving application
according to ISO 5393
Nm 20 25 30 20 20
Weight according to
EPTA-Procedure 01/2003
kg 0.2 0.2 0.3 0.2 0.2
Drive head QC 1/4"
Article number
0 607 453 631
Maximum torque, hard screwdriving application ac-
cording to ISO 5393
Nm 6
Weight according to EPTA-Procedure 01/2003
kg 0.2
OBJ_BUCH-412-001.book Page 30 Thursday, April 3, 2008 3:18 PM
To Next Page
Loading...
