17
Viewing Faulted Points
To properly turn your system on, all doors and windows must be in the
normal (not faulted) condition. Use this feature to locate faulted points.
1. Ensure that the system is turned off (On light is off).
2. Press [CLEAR]. If points are faulted, the display shows:
NOT READY TO
TURN ON
HOLD
TO VIEW
FAULTED POINTS
3. Hold [
] to view faulted points:
POINT 2 FAULTED
FRONT DOOR
POINT 7 FAULTED
BACK DOOR
3. Now that you know which points are faulted, you can return
them to normal. In this example, you would close the front door
and the back door.
4. Once you correct the faults, the system is ready to turn on.
To Next Page
Loading...
