Bosch 2212 - Page 41

41
SYSTEM TROUBLE
Indicates there is a system trouble
condition.
TAMPER PT ##
[point text]
Indicates a point was tampered with.
TESTING BATTERY
MAY TAKE 4 MIN.
Indicates the battery test is in
progress.
TESTING BELL
Indicates the bell test is in progress.
TESTING PHONE
MAY TAKE 10 MIN.
Indicates the phone test is in process.
TIMED OUT
Indicates system was expecting a key
to be pressed, but did not receive it.
TO BYPASS POINTS
PRESS
Prompt to press [ ] to bypass
points.
TO CLEAR ALARM
MEMORY
Instructions to follow regarding
clearing alarm memory.
TO END
PRESS [CLEAR]
Prompt to press [CLEAR] to end the
Step Outside feature.
TO EXIT
PRESS [CLEAR]
Prompt to press [CLEAR] to exit
current function.
TO REMOVE ALARMS
PRESS [CLEAR]
Press the [CLEAR] to remove alarm
messages from the display.
TO STOP
PRESS [CLEAR]
Prompt to press [CLEAR] to stop exit
delay and return system to off state.
TROUBLE PT ##
[point text]
Indicates point trouble. Call your
alarm company for service.
WATCH TONE IS
OFF
Indicates the watch tone is turned
off.
WATCH TONE IS
SHORT BEEP
Indicates the watch tone is currently
set to produce a short beep when a
point is faulted.
WATCH TONE IS
BEEP till key
Indicates the watch tone is currently
set to beep until a key is pressed.
WATCH TONE IS
BEEP till closed
Indicates the watch tone is currently
set to beep until the point is returned
to normal.