Bosch 4100DG-09 - Page 22

74
Boschtools.com
Toll Free: 877-BOSCH-99
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
3
T123X3
HSS 4 3 0.34 0.04
10-24
Progressive
5
T123X
HSS 4 3 0.34 0.04
10-24
Progressive
25
T123X25
HSS 4 3 0.34 0.04
10-24
Progressive
100
T123X100
HSS 4 3 0.34 0.04
10-24
Progressive
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
5
T101DP
HCS 4 2-3/4 0.28 0.07 6
5
T144DP
HCS 4 2-7/8 0.31 0.07 6
5
T344DP
HCS 6 5 0.28 0.07 6
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
5
T101BIF
Bi-Metal 3-1/4 2-5/16 0.30 0.05 14
5
T101AOF
Bi-Metal 3-1/4 2-5/16 0.19 0.05 20
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
5
T101BF
Bi-Metal 4 3 0.3 0.05
10
variable
gullet
Long life; straight, fine cuts; plunge cuts
Hard / soft woods, plastics, plywood,
laminated particleboard 3/16" - 1-1/4"
Ground teeth &
taper ground back
Angled cuts; parallel cuts
Hard / soft woods, plywood, particleboard, plastics 1/4" - 2-3/8"
Ground teeth &
taper ground back
Precise right angle cuts through
material, plunge cuts
Hard / soft woods, laminated particleboard, plywood 3/16" - 2"
Ground teeth & side set
Precise right angle cuts through material
Hard / soft woods, laminated particleboard, plywood 3/16" - 4"
Fine clean cuts in hard wood,
break resistant and durable
Precise cuts, parallel cuts
Fast cuts & long life in thick or thin
metal, pipes and metal profiles
Sheet metal up to 8 gauge, metal 5/64" - 3/8", stainless
steel 1/16" - 1/8", non-ferrous metal 5/64" - 3/4", plastics
1/16" - 1-1/4", fiberglass 3/64" - 3/4"
Side set & ground
Fast cuts through thick
and thin metals
* If cutting metal, use cutting oil, turpentine or a mixture of turpentine and petroleum oil to cool blade. NOTE: Use only with GFCI protected outlets or adapter.
Application Metal*
special
Laminate
Straight cuts
Splinter-free cuts in laminate flooring
Pointed teeth & ground
Pointed teeth & ground
Curved cuts
Splinter-free cuts in laminate flooring
Work without orbital action
Precise, clean cuts
Application Wood Cont’d.
Ground teeth & side set
T-shank Jig Saw Blades