Bosch 4100DG-09 - Page 23

75
Toll Free: 877-BOSCH-99
Boschtools.com
T-shank Jig Saw Blades
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
5
T118BF
Bi-Metal 3-5/8 2-5/8 0.30 0.04
11-14
Progressive
100
T118BF100
Bi-Metal 3-5/8 2-5/8 0.30 0.04
11-14
Progressive
5
T118EF
Bi-Metal 3-5/8 2-5/8 0.30 0.04
14-18
Progressive
100
T118EF100
Bi-Metal 3-5/8 2-5/8 0.30 0.04
14-18
Progressive
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
3
T118B3
HSS 3-5/8 2-5/8 0.30 0.04
11-14
Progressive
5
T118B
HSS 3-5/8 2-5/8 0.30 0.04
11-14
Progressive
100
T118B100
HSS 3-5/8 2-5/8 0.30 0.04
11-14
Progressive
5
T318B
HSS 5-1/4 4-1/4 0.30 0.05 14
100
T318B100
HSS 5-1/4 4-1/4 0.30 0.05 14
5
T118E
HSS 3-5/8 2-5/8 0.28 0.05
14-18
Progressive
3
T118A3
HSS 3-5/8 2-5/8 0.30 0.04
17-24
Progressive
5
T118A
HSS 3-5/8 2-5/8 0.30 0.04
17-24
Progressive
100
T118A100
HSS 3-5/8 2-5/8 0.30 0.04
17-24
Progressive
5
T218A
HSS 3-5/8 2-5/8 0.25 0.04
17-24
Progressive
5
T318A
HSS 5-1/4 4-7/64 0.37 0.04 24
100
T318A100
HSS 5-1/4 4-7/64 0.37 0.04 24
5
T118G
HSS 3-5/8 2-5/8 0.30 0.04 36
Economical
Straight cuts
Medium-thin metals 1/8" - 1/4" (ferrous and non-ferrous)
Wavy set & milled
Straight cuts in pipes, profiles & sheet metal
Medium-thin metals 5/64" - 5/16" (ferrous and
non-ferrous), pipes, profiles diameters 5/64" - 3-1/8"
Wavy set & milled
Wavy set & milled
For material thickness under 3/64"
use a thin piece of wood as backing
Curved cuts
Sheet metal 10-16 gauge, thin metals 1/16" - 1/8" (ferrous
and non-ferrous)
Wavy set & milled
Straight cuts in pipes, profiles & sheet metal
Sheet metal 10-16 gauge, thin metals 1/16" - 1/8"
(ferrous and non-ferrous), pipes <2-1/2" diameter,
tube stock, angle iron
Wavy set & milled
Straight cuts
Sheet metal 17-26 gauge, very thin metals
1/64" - 3/64" (ferrous and non-ferrous)
Straight cuts & long life
Medium-thin metals 1/8" - 1/4" (ferrous and non-ferrous)
Wavy set & milled
Break resistant
and durable
Straight cuts
Sheet metal 10-16 gauge, thin metals 1/16" - 1/8"
(ferrous and non-ferrous)
Wavy set & milled
Straight cuts
Medium-thin metals 5/64" - 7/32" (ferrous and non-ferrous)
Wavy set & milled
Straight cuts & long life
Medium-thin metals 5/64" - 7/32" (ferrous and non-ferrous)
Wavy set & milled
* If cutting metal, use cutting oil, turpentine or a mixture of turpentine and petroleum oil to cool blade. NOTE: Use only with GFCI protected outlets or adapter.
Application Metal* Cont’d.
T 118 E
W 692 131 534
W 692 131 285 W 692 132 264
T 118 EF