3/52
RE 91071-01-B/03.2015, A2FM/A2FE Series 70, Bosch Rexroth AG
1 About this documentation 5
1.1 Validity of documentation 5
1.2 Required and supplementary documentation 5
1.3 Presentation of information 6
1.3.1 Safety instructions 6
1.3.2 Symbols 7
1.3.3 Designations 7
1.3.4 Abbreviations 8
2 Safety instructions 9
2.1 About this chapter 9
2.2 Intended use 9
2.3 Improper use 9
2.4 Personnel qualifications 10
2.5 General safety instructions 11
2.6 Product-specific safety instructions 12
2.7 Personal protective equipment 14
3 General information on property damage andproduct damage 15
4 Scope of delivery 18
5 About this product 19
5.1 Performance description 19
5.2 Product description 19
5.2.1 Layout of the axial piston unit 19
5.2.2 Functional description 20
5.3 Product identification 20
6 Transport and storage 21
6.1 Transporting the axial piston unit 21
6.1.1 Transporting by hand 21
6.1.2 Transporting with lifting device 21
6.2 Storing the axial piston unit 23
7 Installation 25
7.1 Unpacking 25
7.2 Installation conditions 25
7.3 Installation position 26
7.3.1 Below-reservoir installation (standard) 26
7.3.2 Above-reservoir installation 27
7.4 Installing the axial piston unit 28
7.4.1 Preparation 28
7.4.2 Dimensions 28
7.4.3 General instructions 28
7.4.4 Installation with coupling 29
7.4.5 Installation on a gearbox 30
7.4.6 Installation with cardan shaft 30
7.4.7 Completing installation 30
7.4.8 Hydraulically connecting the axial piston unit 31
7.5 Performing flushing cycle 35
Contents
To Next Page
Loading...
Need help?
General