Bosch A4VSG - Display of Information; Safety Instructions; Signal Word

6/60 About this manual
Bosch Rexroth AG, RE 92100-01-B/09.2012 Series 10, 11 and 30,
Table 1: Required and supplementary documentation
Title Document number Document type
Environmentally acceptable hydraulic fluids
Describes the requirements on an environmentally acceptable hydraulic fluid
for operation with Rexroth hydraulic components and assists you in selecting
a hydraulic fluid for your hydraulic system.
RE 90221 Data sheet
Fire-resistant, water-free hydraulic fluids (HFDU/HFDR)
Describes the requirements on fire-resistant, water-free hydraulic fluids for
operation with Rexroth hydraulic components and assists you in selecting
a hydraulic fluid for your hydraulic system.
RE 90222 Data sheet
Information of the use of hydrostatic drives at low temperatures
Contains additional information on the use of Rexroth axial piston units at
low temperatures.
RE 90300-03-B Manual
Storage and preservation of axial piston units
Contains additional information on storage and preservation.
RE 90312 Data sheet
1.3 Display of information
Standardized safety instructions, symbols, terms and abbreviations are used so that
you can use this documentation to work quickly and safely with your product. To give
you a better understanding they are explained in the sections below.
1.3.1 Safety instructions
This documentation includes safety instructions in chapter2.6 "Product-specific
safety instructions" on page11 and in chapter3 "General instructions on damage
to equipment and the product" on page14 and before a sequence of actions or an
instruction for action involving a risk of personal injury or damage to equipment.
The described danger prevention measures must be observed.
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger!
Consequences in case of noncompliance
▶ Measure for danger prevention
▶ <List>
• Safety sign: draws attention to the danger
• Signal word: identifies the degree of the danger
• Type and source of danger: identifies the type and source of the danger
• Consequences: describes what occurs if the safety instructions are not complied with
• Precautions: states how the danger can be avoided