To Next PageTo Next PageWhat to do if Bosch Service Equipment UV dye recharge shows high system pressure?
If the Bosch Service Equipment indicates high pressure in the system during a UV dye recharge, perform vacuuming.
What to do if Bosch ACS 651 Service Equipment oil recharge shows high system pressure?
If the Bosch Service Equipment indicates high pressure in the system during an oil recharge, perform vacuuming.
What does 1002 RECOVERY mean on Bosch ACS 651 Service Equipment?
If the Bosch Service Equipment displays a 1002 RECOVERY error, this indicates a high pressure shutdown. Check for any blockages in the vehicle A/C system.
What to do if Bosch ACS 651 UV dye recharge shows high pressure in vehicle?
If the Bosch Service Equipment indicates high pressure in the vehicle during a UV dye recharge, perform recovery.
What to do if Bosch ACS 651 Service Equipment oil recharge shows high pressure in vehicle?
If the Bosch Service Equipment indicates high pressure in the vehicle during an oil recharge, perform recovery.
What to do if Bosch Service Equipment detects leak during vacuuming?
If a leak is detected during vacuuming with the Bosch Service Equipment, check if the used oil bottle is disconnected. If it is, connect the bottle.
What to do if Bosch ACS 651 Service Equipment R134a recharge shows high pressure in vehicle?
If there's high pressure in the vehicle during an R134a recharge with your Bosch Service Equipment, perform recovery.
General| Refrigerant | R134a |
|---|---|
| Compressor Type | Hermetic |
| Power Supply | 230V, 50/60Hz |
| Display | LCD |
| Input Voltage | 230V |
| Recovery Rate | 0.3 kg/min |
| Operating Modes | Automatic, Manual |
Explains the structure, keywords, and meanings of warning notices and symbols used in the manual.
Advises to observe and maintain the legibility of warning notices displayed on the physical product itself.
Defines intended users and their qualifications for operating the device.
Outlines copyright and liability terms for product software and data.
Details contractor responsibilities for accident prevention and workplace safety.
Provides critical safety guidelines for using the ACS 651/751 unit.
Lists and explains the built-in safety mechanisms of the ACS 651/751.
Describes the general purpose and capabilities of the ACS 651/751 unit.
Lists components and order numbers included in the ACS 651/751 package.
Identifies and illustrates the main parts of the ACS 651/751 unit using front and rear views.
Details the operational aspects and functions of the ACS 651/751 unit.
Step-by-step guide for unpacking the ACS 651/751 unit from its packaging.
Instructions for initial setup, including handle attachment and edge protector installation.
Guide to powering on the unit, performing self-test, and selecting the initial language.
Explains how to navigate settings to configure language, date, time, and workshop details.
Details how to enable/disable the printer and print workshop details.
Procedure to reset the zero points for the used oil, fresh oil, and UV dye scales.
Describes how to perform a calibration check on the refrigerant tank scale for accuracy.
Procedure to add and select operator names for A/C service operations.
Guide to modifying default settings for automode parameters, buzzer, and record limits.
Explains how to set oil quantity calculation and other automode service parameters.
How to select the appropriate hose length for the service operation.
How to enable or disable the buzzer for audible notifications.
Describes how to set the limit for storing R134a service data records.
How to select the type of oil can (fresh oil or UV dye) for service.
Guide to entering vehicle details like code, manufacturer, model, and R134a quantity into the database.
Preparation steps and instructions for filling the internal refrigerant cylinder with R134a.
How to access and view system status information like pressure and oil levels.
Instructions for installing and using the R134a record transfer tool on a PC/laptop.
Explains the overall process of refrigerant recovery, vacuuming, and oil/dye injection.
Details the sequence of phases in A/C service: recovery, vacuum, oil recharge, UV recharge, refrigerant recharge.
Describes automatic and manual modes, and service options like quick, precision, and OE specific.
Details quick, precision, and OE specific service options for the ACS 651.
Essential pre-service checks and procedures, including reading documentation and handling refrigerant.
Explains how the unit executes service phases automatically based on selected parameters.
Guide to selecting vehicle data from the built-in database for automatic parameter setup.
How to select a vehicle from the list of the 10 most recently serviced vehicles.
Procedure for setting unique service parameters for vehicles not in the database.
Details the different phases (recovery, vacuum, oil, UV dye, recharge) that can be executed manually.
Step-by-step guide to selecting and executing individual service phases in manual mode.
Procedure to flush the hydraulic system when changing between PAG and POE oil types.
Explains the process of flushing the vehicle A/C system using refrigerant to remove impurities.
Guide for adding refrigerant to the vehicle A/C system if the quantity decreases.
Procedure to drain refrigerant from hoses after each A/C service operation.
How to conduct a test to check the cooling effectiveness of the vehicle A/C system.
Information on manufacturer-specific service programs, applicable only for ACS 651.
Details the specific refrigerant recovery process for Renault vehicles in automatic mode.
Outlines recovery procedures based on engine and A/C system status (OK/Not OK).
Details how to perform refrigerant recovery for specific OE services using manual mode.
Lists spare and wearing parts for the ACS 651/751 with their order numbers.
Refers to chapter 4.10 for the procedure to fill the internal refrigerant tank.
Explains how to view service history, self-test reports, R134a logs, and error lists.
How to view the last three vehicle A/C service reports from the Service Record menu.
How to view the most recent self-test report for the ACS 651/751.
How to view monthly and annual R134a data logs for refrigerant recovery and recharge.
Procedure for transferring R134a data records from the unit to a USB disk.
How to transfer R134a logs from a USB disk to a PC or laptop for storage.
How to view the details of the last 5 errors that occurred during vehicle A/C service.
Guide for changing the vacuum pump oil based on operating hours or a specific message.
Step-by-step instructions for replacing the filter drier, including entering the unique PIN.
Procedure for replacing the filter inserts within the inline filters.
Instructions on how to replace the printer paper roll in the ACS 651/751.
How to manually trigger or view the results of the ACS 651/751's self-test.
Procedure for replacing the standard 3m hoses with longer 6m hoses.
Guide for updating the ACS 651/751 software, firmware, languages, and databases via USB.
Refers to chapter 4.5 for the procedure to set the zero points for the scales.
How to revert all settings to the factory default configuration.
How to view the date of the last calibration performed on the unit.
Refers to chapter 4.6 for the procedure to perform a calibration check.
Guidelines for the proper disposal of electronic components and the unit as per WEEE directive.
Specific instructions for disposing of the LCD display according to local regulations.
How to handle and dispose of used refrigerants, UV media, lubricants, and oils.
Instructions for disposing of the filter drier through designated return points or local regulations.
States the product's compliance with EN 61000-6-2 and EN61000-6-4 EMC standards.
