To Next PageTo Next Page
Need help?Do you have a question about the Bosch ACS 810 and is the answer not in the manual?
General| Refrigerant | R134a |
|---|---|
| Operating Modes | Automatic and Manual |
| Compressor | 1/3 HP |
| Power Supply | 230V, 50/60Hz |
| Display | LCD |
| Cooling | Air-cooled |
| Input Voltage | 230V |
| Protection Features | High-pressure protection |
Explains warning notices structure and meaning.
Advises to observe warning notices on products.
Defines who is authorized to use the product.
Outlines terms and conditions for product use.
Details workshop operator responsibilities and basic rules.
Provides safety guidelines for handling refrigerant R134a.
Safety precautions for working on vehicles, especially with high voltage.
General operational safety rules and precautions.
Guidelines for performing maintenance work safely.
Details recommended safety devices like RCCB.
Explains parts subject to the Pressure Equipment Directive.
Describes the A/C service unit's purpose and limitations.
Lists the items included in the product package.
Maps software text elements to their function.
Provides an overview of the unit's physical components and layout.
Details the unit's display and control panel functions and layout.
Explains the function of various keys on the control panel.
Details input keys, brakes, power cord, master switch.
Explains the overall function of the ACS 810.
Details procedures for calibrating and taring the unit.
Explains how to configure various unit settings.
Guides on performing individual service phases manually.
Guides on performing automated recovery, vacuum, and filling.
Steps for safely removing packaging and checking contents.
Instructions for connecting service hoses to the unit.
Guides on connecting fresh and used oil bottles.
Steps for connecting the internal refrigerant cylinder.
How to power on the ACS 810 unit.
Outlines essential settings needed during initial commissioning.
Detailed process for filling the internal refrigerant cylinder.
Checks visible components of the AC system for damage.
Guides on performing a pressure test on the vehicle AC system.
Details diagnostic software, preparation steps, and execution.
Covers managing vehicle and user data within the system.
Explains the different service phases like recovery, vacuum, filling.
Details how to perform service phases manually.
Steps for extracting refrigerant from the vehicle.
Procedure for creating a vacuum in the AC system.
Instructions for adding refrigerant and oil to the AC system.
Process for recycling refrigerant in the tank.
Guides on performing automated recovery, vacuum, and filling.
Lists service prompts and corresponding actions for user guidance.
Explains common fault messages and their solutions.
Shows default factory settings for various parameters.
Covers settings for unit measurement, hose length, and contrast.
Instructions for entering serial number and activating flush function.
How to activate/deactivate expert mode for advanced users.
Covers printing, exporting, and deleting stored service data.
Instructions for cleaning and list of spare parts.
Specifies maintenance intervals and calibration information.
Steps for safely removing fresh and used oil bottles.
Procedures for updating firmware and vehicle database via PS2 stick.
Guide for replacing the printer paper roll.
How to periodically check the non-condensable gas purge valve.
Procedures for replacing the combo filter and resetting its interval.
Covers changing vacuum pump oil and resetting the oil change interval.
Notes for temporary shutdown and moving the unit.
Guidelines for safely disposing of the unit and its components.
Lists detailed technical specifications and performance data for the ACS 810.
Specifies operating and storage temperature and humidity limits.
States compliance with EMC standards.
