Bosch ACS 810 - Expert Mode; Service Data Report Management

ACS 810 settings | ACS 810 | 59 | en
1 689 989 601 2020-12-01| Robert Bosch GmbH
11.7 Expert mode
i When expert mode is activated, supporting
messages for individual action steps are not
displayed on the screen.
1. Call up the start screen.
2. Press <3> and <Flush> simultaneously and release.
 The message ENTER CODE 0000 is displayed.
3. Enter 2222 and confirm with E .
4. Select "EXPERT MODE"" with o u and confirm
with E.
5. Select activate or deactivate with o u and confirm
withE .
" Expert mode is activated or deactivated.
i Return with <Stop>.
11.8 Service data report
11.8.1 Activate/deactivate consumption
R134areport
i ACS 810 can store the R134a consumption data
during all charging and extraction processes.
! This function can only be activated or deactivated
by customer service.
11.8.2 Printing data
i The data storage of ACS 810 may contain more data
than can be printed on one paper roll (printer).
1. Press <MENU>.
2. Select "REPORT MANAGEMENT" with o u and
confirm with E.
3. Select "PRINT REPORT" with o u and confirm with
E.
 The number of saved protocols is displayed.
4. Print all protocols with E .
" All protocols are printed.
i
Return with <Stop>.
i We recommend that stored reports are exported,
printed and then deleted at least once a week.
! All data on the PS2 stick is deleted!
1. Press <MENU>.
2. Select "REPORT MANAGEMENT" with o u and
confirm with E.
3. Select EXPORT DATA with o u and confirm with
E.
4. Insert PS2 stick.
" All protocols are saved on the PS2 stick.
i The software A/C Data Manager (optional
accessory) can be used to view and manage the
data on a PC.
11.8.4 Deleting data
1. Press <MENU>.
2. Select "REPORT MANAGEMENT" with o u and
confirm with E.
3. Select DELETE DATA with o u and confirm with E.
 DELETE DATA?
1 - YES
2 - NO
4. Delete all protocols with <1>.
i The protocols cannot be deleted individually.
11.8.3 Exporting data