Setting the COM Port
The COM port that has been assigned to the additional COM device (here COM4) has to be set
in the A-Link Plus program.
4 Select File ā Communication Settings from the menu bar of the A-Link Plus program.
Figure 5.1: Selecting Communication Settings
The Communication Settings dialog opens.
4 Set the COM port assigned to the additional COM device (here COM4) as Direct Link
Port.
5.5.4
AMAX panel Programming and Operating the AMAX System | en 15
Bosch Sicherheitssysteme GmbH Quick Start Manual 2015.05 | 05 | F.01U.309.297
To Next Page
Loading...
