Index
Index
1 Warning 2
Warning
2 Appliance details 4
2.1 Features 4
2.2 AQ125 BO specifications (Technical data) 4
2.3 Unpacking the AQ-1 25-BO heater 5
2.4 General rules to follow for safe operation 5
2.5 Dimensions and installation clearances 6
3 Installation instructions 7
3.1 Introduction 7
3.2 Proper location for installing your heater 7
3.3 Heater placement and clearances 8
3.4 Mounting installation 8
3.5 Gas piping & connections 10
3.6 Measuring gas pressure 12
3.7 Water connections 12
3.8 Electrical connections 13
4 Operation instructions 14
4.1 For your safety read before operating your water
heater 14
4.2 Lighting instructions 14
4.3 To turn off appliance 14
4.4 Setting the water temperature 14
5 Maintenance and service 16
5.1 Maintenance intervals 16
5.2 Water valve 16
5.3 Pilot 16
5.4 Main burners 16
5.5 Vent assembly 16
5.6 Mineral scale build-up 16
Featuring
Piezo Ignition
For your safety
Do not store or use gasoline or other flammable,
combustible or corrosive vapors and liquids in the
vicinity of this or any other appliance,
6 Troubleshooting 17
6.1 Introduction 1 7
6.2 Pilot will not light 1 7
6.3 Pilot will light but not stay on when button released 1 7
6.4 Burner do not ignite with water flow 1 7
6.5 Hot water temp fluctuates from hot to cold 1 7
6.6 Water is too hot 18
6.7 Water is not hot enough 18
7 Interior components and diagram parts list 19
7.1 Interior components 19
7.2 Components diagram 20
7.3 Parts list 21
8 Protecting the environment 22
9 Twelve Year Limited Warranty 23
2 8 716 473 147
To Next Page
Loading...
