To Next PageTo Next Page
Need help?Do you have a question about the Bosch WT 11 AM1 E and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | WT 11 AM1 E |
| Category | Water Heater |
| Language | English |
Explains warning triangles, keywords (NOTICE, CAUTION, etc.), and informational symbols.
Provides critical safety advice for gas leaks, fitting, maintenance, and material handling.
Confirms compliance with EU directives.
Details the model's technical code and its component meanings.
Lists included accessories like flow restrictor plates and gas accessories.
Outlines appliance features like ignition, sensors, and safety mechanisms.
Mentions conversion kits for gas types and exhaust accessories.
Presents a schematic of the appliance's electrical components and wiring.
Explains hot water operation, safety cut-offs, and restarting procedures.
Advises on initial checks like gas type verification and opening valves.
Details how to turn the appliance on and off using the main switch.
Explains how to adjust water temperature and addresses potential output limits.
Describes the fault indication system using the reset button's red light.
Instructions for purging the appliance, useful for frost protection.
Lists available flue pipes, elbows, and sets with part numbers.
Shows recommended clearances and adapter details for vertical flue setups.
Explains the need and method for fitting a restrictor plate for optimal function.
Provides recommended clearances for horizontal flue installations.
Details fitting a restrictor plate for horizontal flue installations.
Diagrams and notes for integrating the appliance into solar heating systems.
Covers gas company consultation, legislation, and site ventilation requirements.
Guidelines for choosing a suitable installation site, respecting country rules and heat sources.
Specifies required clearances for installation and maintenance access.
Instructions for correctly mounting the appliance's support bar.
Covers unpacking, parts check, and cover removal for installation.
Details pipe connections and anti-return valve advice.
Safety warnings and procedures for connecting the gas supply.
Guidance on installing flue pipes, ensuring a proper seal.
Emphasizes regulatory compliance and earthed connection.
Instructions for connecting the provided power cord and plug.
States that sealed parts should not be tampered with by users.
Details the procedure for changing gas types, requiring a qualified technician.
Recommends annual checks and maintenance for efficiency and emission reduction.
Covers functional checks, heat exchanger, burner, and water filter maintenance.
Steps to follow after performing maintenance, including checks and restarts.
Procedure for replacing blown fuses in the control box.
Explains how to adjust the appliance's temperature range via jumpers.
